Heavy Equipment Wash Station - Model PW2WC2-1842 Two Station One Lane Wash Bay (military vehicle tactical decontamination station)

Hardened Wash Bay enclosure with air conditioning, heat and custom desert air filter, painted Air Force grey


Cyclonator®III in hardened enclosure

System Description

The Wash Lane

• 18’ x 42’ drive through wash pad
  • Non skid smooth surface, no trip hazards
  • Low profile, 6” deck height
  • Low angle, 3 degree ramps at both entrance and exit
  • 90 ton capacity, 3 times higher than undulating portable racks
• Automatic mud conveyor dumps mud into portable hopper
  • Stainless steel wedge wire vacuum filter leaves solids behind (patent pending)
  • Only available from Riveer
• 2 hot water pressure washers with 75’ of hose on reels mounted flush to side walls
• 2 foam guns with 75’ of hose on reels mounted flush to side walls
• 2 water cannons with 75’ of hose on reels mounted flush to side walls
  • Only available from Riveer
  • All reel cabinets are heated for all-weather operation
• Push button controls in ruggedized NEMA 4 enclosures
• 6’ high galvanized over spray walls along both sides

All Riveer wash lanes are 18’ wide with 6’ high over spray walls. They can be purchased without walls, but when using high pressure washers and water cannons, over spray will be significant. An 18’ wide wash pad gives ample room for users on the rack. The non-skid flat (not undulating) surface provides the users with a safe and comfortable deck to work on.

The Wash Station

40’ long hardened all weather enclosure

• Heated, air conditioned and dehumidified
• Tough Cor-Ten steel walls painted to customer spec
• Aluminum interior walls
• Aluminum diamond tread plate floors
• Stackable
• Transport with crane or forklift
• Meets all DoD transportation specs
• Automatic lights
• Lockable

Riveer Cyclonator® III all stainless steel filtration system with:

• Internal conveyor dumps settled fines into portable hopper
• Oil coalescing and automatic oil skimmer
• Bioreactor with automatic pH adjust
• 24/7 air injection
  • Patented fine bubble technology
• Automatic injection of oil eating bacteria
• 16 oz per day injector
• 2 month reservoir
  • 1 year supply provided in overseas deployment kit
• 24/7 ozone injection
  • Injects ozone in holding tank to kill hazardous bacteria
Manual changeover allows system to change over to ozone only for specific applications where bacteria don’t perform well.
• 2 high pressure multi-media filters to remove:
  • Emulsified oil
  • Heavy metals
  • Suspended solids
• Automatic back wash and capture of solids
  • No filters to change
• Flow rate of 80 GPM
• 1000 gallon water storage tank for continuous operations in remote locations
• 2 Edson diaphragm recovery pumps
  • Run pumps dry without damage
  • Suction pump recovers all water from rack
  • No sump pumps to clog and fail
• Allan Bradley PLC controls for all filtration systems and washers
• Optional communications package allows remote monitoring/control of all motors and timers
• Meets all US and CE electric standards; UL, TUV, IEC, NEC, NFPA

Riveer water cannon


4 hot water pressure washers in hardened enclosure

Built in wash systems:

• 2 each 3000 PSI 5 GPM hot water pressure washers
  • Diesel or JP-8
• 2 each air injected high velocity foamers with trigger gun controls
• 2 each 125 PSI @25 GPM water cannons with Darley guns
• All guns on self winding reels with 75’ of hose
• All pumps auto start/stop with over rides
• All systems in and out of container protected from freezing
  • Includes heated reel and gun locker on rack

Overseas Deployment Package

Spares kit comes in lockable cabinet integral to HEWS enclosure.

Optional Equipment

• Automatic undercarriage rinse and wheel wash
  • 30 high flow nozzles sequenced to flush complete undercarriage and wheels
  • Momentary on switch controls sequence
• Remote monitoring
  • Internet access and monitoring of all parameters including:
    • Pump operations
    • Water levels
    • Input and output status
    • Timer values
  • Allows for remote trouble shooting and programming
• Optional wash rack enclosure with heat
  • 16’ high center
  • Canvas over steel construction
  • Convection heat
  • End closure flaps
• Skid steer side trough instead of conveyor (patent pending)
  • 6’ wide mud settling trough runs length of wash pad
  • Provides 900 gallons of additional settling volume
  • Holds 4.5 cubic yards of solids
• Onsite installation and training
  • Riveer personnel install your equipment and train your personnel in operation and maintenance at your site, worldwide
  • Follow-up training on a quarterly or bi-yearly basis to keep your personnel up to date and your equipment operating to spec

Pricing

FOB: Delivered CONUS
Delivery: 6 – 8weeks
Purchase Terms: TBD