Heavy Equipment Wash Station - PW2WC2-2L-3642 Two Station Two Lane Wash Bay (military vehicle tactical decontamination station)
|
  Marine Corps, (CIBRF) 18’ x 35’ pad with conveyor (left side). Drive thru configuration Filtration equipment and pressure washer installed in all-weather enclosure Rack installed on slightly improved surface  Riveer patented Dry-Deck allows water to flow under the deck to collection trough, keeping work area dry  Hardened Wash Bay enclosure with air conditioning, heat and custom desert air filter, painted Air Force grey  20’ hardened enclosure with Cyclonator Deuce, hot water pressure washer, water cannon, two hose reels mounted at back, high pressure auto backwashing media filter in foreground
System Description
The Wash Lane
- 2 each 18’ x 42’ drive through wash pad
- Non skid smooth surface, no trip hazards
- Low profile, 6” deck height
- Low angle, 3 degree ramps at both entrance and exit
- 90 ton capacity, 3 times higher than undulating portable racks
- Dry-Deck design keeps rack dry
- Water goes through top surface to water channels that carry water to collection troughs
- Automatic mud conveyor dumps mud into portable hopper
- Stainless steel wedge wire vacuum filter leaves solids behind (patent pending)
- Only available from Riveer
- 2 hot water pressure washers with 75’ of hose on reels mounted flush to side walls
- 2 foam guns with 75’ of hose on reels mounted flush to side walls
- 2 water cannons with 75’ of hose on reels mounted flush to side walls
- Only available from Riveer
- All reel cabinets are heated for all-weather operation
- Push button controls in ruggedized NEMA 4 enclosures
- 6’ high galvanized over spray walls along both sides
All Riveer wash lanes are 18’ wide with 6’ high over spray walls. They can be purchased without walls, but when using high pressure washers and water cannons, over spray will be significant. An 18’ wide wash pad gives ample room for users on the rack. The non-skid flat (not undulating) surface provides the users with a safe and comfortable deck to work on.
The Wash Station
20’ long hardened all weather enclosure
- Heated, air conditioned and dehumidified
- Tough Cor-Ten steel walls painted to customer spec
- Aluminum interior walls
- Aluminum diamond tread plate floors
- Stackable
- Transport with crane or forklift
- Meets all DoD transportation specs
- Automatic lights
- Lockable
Riveer Cyclonator® III all stainless steel filtration system with:
 Riveer water cannon  4 hot water pressure washers in hardened enclosure
Built in wash systems:
- 2 each 3000 PSI 5 GPM hot water pressure washers
- 2 each air injected high velocity foamers with trigger gun controls
- 2 each 125 PSI @25 GPM water cannons with Darley guns
- All guns on self winding reels with 75’ of hose
- All pumps auto start/stop with over rides
- All systems in and out of container protected from freezing
- Includes heated reel and gun locker on rack
Overseas Deployment Package
| Recovery pump |
1 ea |
| Filter pump |
1 ea |
| Pressure washer pump |
1 ea |
| Air compressor |
1 ea |
| Automatic air valves |
2 ea |
| High pressure hose |
2 ea 75’ sections |
| Water cannon hose |
2 ea 75’ sections |
| Foamer hose |
2 ea 75’ sections |
| High pressure guns and lances |
4 ea |
| Water cannon guns |
2 ea |
| Foamer guns |
2 ea |
| Multi-media pack |
2 ea |
| Coalescing cubes |
4 ea |
| Oil skimmer belt |
1 ea |
| Bacteria |
18 ea 5 gallon buckets |
| Mil Spec soap |
10ea 5 gallon buckets |
Spares kit comes in lockable cabinet integral to HEWS enclosure.
Optional Equipment
- Automatic undercarriage rinse and wheel wash
- 30 high flow nozzles sequenced to flush complete undercarriage and wheels
- Momentary on switch controls sequence
- Remote monitoring
- Internet access and monitoring of all parameters including:
- Pump operations
- Water levels
- Input and output status
- Timer values
- Allows for remote trouble shooting and programming
- Optional wash rack enclosure with heat
- 16’ high center
- Canvas over steel construction
- Convection heat
- End closure flaps
- Onsite installation and training
- Riveer personnel install your equipment and train your personnel in operation and maintenance at your site, worldwide
- Follow-up training on a quarterly or bi-yearly basis to keep your personnel up to date and your equipment operating to spec
|